|
|
|
iClock 100 Fingerprint Clocking Machine
The iClock is one of the worlds most
advanced clocking machines with a fantastic 3.5inch, TFT
high-definition graphical interface, and great feel keypad.
It adopts the worlds most advanced
fingerprint sensing technology and algorithms, fast identification
speed, the FAR rate is 0.0001%.
The iClock is built on a Linux platform
for reliability and functionality.
Communication to the iClock is via
10/100mB Ethernet port, Rs232 or it can be completely stand alone.
Setup and clocking's are collected with the use of a USB flash drive
which plugs into a USB port at the bottom of the iClock.
To enrol users this is done at the
iClock.
All users enrolled into the iClock can
be downloaded into a PC so you always have a backup of the users so
you can replace or add to the clocking system without having to
enrol people every time.
A choice of clock formats is also
available and also the ability to add pictures or notices as a
screen saver.
As well as an audible beep there is
also speech announcements saying ‘thank you’ if verified OK or
‘please try again’ if not recognised. There are other voice
announcements to say when clock is full etc.
There are also two methods of clocking
fingerprint or with a PIN number, both can be set up on all
accounts.
Clocking does can be reviewed at the
iClock by the user or all clocking’s by an administrator.
The iClock and the software is a
complete package and you can be up and working within a few hours.
|
Specification
-
User capacity :
1500
-
Transaction
capacity : 30000
-
Linux Operating
System
-
Verification
mode : 1:1 or 1:N
-
Fingerprint identification
speed - 3,500 match in 1 second
-
Holiday
Management, will work standalone
-
Communicational:
TCP/IP or RS232 and RS485
-
Keyboard and
Display: LCD with 80 character and figure
keypad
-
Power: 12 VDC,
stay current: 50MA, work current: 400 MA
-
Identification
speed: <=2 seconds
-
FRR: <=1%
-
FAR: <=0.0001%
-
Algorithm
Version Bio9.0
-
USB Standalone
operation (flash disk required)
-
Temperature
operating: 0'C - 45'C
-
Humidity
operating: 20%-80%
-
Size:
160(W)*140(L)*45(H)mm
-
6 Function Keys to
user-defined functions
-
Connects to
ATT-TAMS software
-
12 months
Warranty
|
|
|
