|
 |
|
|
|
|
 |
|
 |
|
|
|
|
|
|
iClock 360
The iClock 360
is one of the worlds most advanced clocking machines with a
fantastic 3.5inch, TFT high-definition graphical interface, and
great feel keypad supporting T9 dictionary input.
It adopts the
worlds most advanced fingerprint sensing technology and algorithms,
fast identification speed, the FAR rate is 0.0001%.
The iClock 360
is built on a Linux platform for reliability and functionality.
Communication
to the iClock 360 is via 10/100mB Ethernet port or it can be
completely stand alone. In stand alone mode setup and clocking's are
collected with the use of a USB flash drive which plugs into a USB
port at the side of the iClock 360.
8 function
keys enable the setup off clock in/out, break time, overtime etc.
These different clocking's are then indicated within the ATT-TAMS
software.
All users
enrolled into the iClock can be downloaded into a PC so you always
have a backup of the users so you can replace or add to the clocking
system without having to enrol people every time.
A choice of
clock formats is also available and also the ability to add pictures
or notices as a screen saver.
As well as an
audible beep there is also speech announcements saying ‘thank you’
if verified OK or ‘please try again’ if not recognised. There are
other voice announcements to say when clock is full etc. A start/end
audible tone is also programmable into the iClock 360 to indicate
break, end of work etc.
There are also
two methods of clocking fingerprint or with a PIN number, both can
be set up on all accounts.
Clocking's can
be reviewed at the iClock 360 by the user or all clocking’s by an
administrator.
The ATT-TAMS
software that is supplied with the iClock is a full version of the
software that enables you to setup features within the iClock, enter
employee details, create shift patterns, manually amend clocking's
for people who forgot to clock.
Report
generating is also built into the software and the ability to export
into many different formats.
The iClock 360
and the software is a complete package and you can be up and working
within a few hours.
Specification
-
User capacity :
1500
-
Transaction
capacity : 30000
-
Linux Operating
System
-
Verification
mode : 1:1 or 1:N
-
Fingerprint identification
speed - 3,500 match in 1 second
-
Holiday
Management, will work standalone
-
Communicational:
TCP/IP
-
Keyboard and
Display: LCD with 80 character 8 Function
Keys and T9 Dictionary.
-
Power: 12 VDC,
stay current: 50MA, work current: 400 MA
-
Identification
speed: <=2 seconds
-
FRR: <=1%
-
FAR: <=0.0001%
-
Allowable finger
Rotation +/- 180 degrees
-
Algorithm
Version Bio9.0
-
USB Standalone
operation (flash disk required)
-
End/Start Bell
operation
-
Temperature
operating: 0'C - 45'C
-
Humidity
operating: 20%-80%
-
Size:
160(W)*140(L)*45(H)mm
- Connects to
ATT-TAMS software
- 12 months
Warranty
|
|
|
 |
|
 |
|
|
|
Copyright © 2003-2006 Capture
Services. All Right Reserved. All Trademarks Acknowledged
|
